{"wiki":"en","slug":"bintec-be.ip-plus","markdown":"<tags data-tags=\"Telefonanlagen;Einrichtungshilfen;\"/>\n\n# Help for bintec-elmeg® be.IP plus\n\n<!-- block: einrichtungshilfe -->\n## 1. Setup guide\n\nThis setup guide describes how to put a Behnke Station into operation as a SIP subscriber on a bintec-elmeg® be.IP plus telephone system. In the following, it is assumed that the basic configuration of the bintec-elmeg® system has already been carried out, and we limit ourselves exclusively to the steps required to put the Behnke Station into operation.\n\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\n\n<!-- block: einrichten-des-teilnehmers-fuer-die-behnke-stati -->\n### 1.1. Setting up the subscriber for the Behnke Station\n\n%[NOTE_MINIMAL_SETUP_OF_TK_USER](NOTE_MINIMAL_SETUP_OF_TK_USER)%\n\n- Open the management console of the bintec-elmeg® system.\n- Log in with your administrator account.\n\n![bintec-elmeg® management console, login window](uploads/d298e84967024af08c63588d203b6b57/bintec-elmeg_be.IP_plus_01.png)\n\n- Scroll to the section **TELEFONIE**\n- In the section **TELEFONIE**, click **TELEFONIE** at the bottom right\n\n![bintec-elmeg® management console, start page with section TELEFONIE](uploads/9027801264b634d12352946101ffc3bc/bintec-elmeg_be.IP_plus_02.png)\n\n- Go to the top navigation bar.\n- Click the menu item **BENUTZER** there.\n- Go to the button **NEU** (bottom right) and click it.\n\n![bintec-elmeg® management console, TELEFONIE page](uploads/e8c5db7f7c6e65290865e35611207922/bintec-elmeg_be.IP_plus_03.png)\n\n- Choose values for name, description and password.\n- Enter these values in the input fields **Name**, **Beschreibung** and **Passwort**.\n- Make a note of these values; you will need them to configure the Behnke Station.\n- Click the **OK** button at the bottom right to save the configuration.\n\n![bintec-elmeg® management console, user creation](uploads/e4d42a24de0d2fa60e60af3e9bf495cb/bintec-elmeg_be.IP_plus_04.png)\n\n- Go to the top navigation bar.\n- Click the menu item **INTERNE RUFNUMMERN** there.\n- Go to the button **NEU** (bottom right) and click it.\n\n![bintec-elmeg® management console, TELEFONIE page](uploads/1bd46d67d4c06c74072cfa383d47854f/bintec-elmeg_be.IP_plus_05.png)\n\n- Choose values for the internal phone number and description.\n- Enter these values in the input fields **Int. Rufnummer** and **Beschreibung**.\n- In the selection field **Benutzer**, select the user created in the previous step.\n- Make a note of the phone number; it is needed to configure the Behnke Station.\n- Click the **OK** button at the bottom right to save the configuration.\n\n![bintec-elmeg® management console, setting the phone number](uploads/bb4658f00bbf7fa1c77641250af897d3/bintec-elmeg_be.IP_plus_06.png)\n\n- Go to the top navigation bar.\n- Click the menu item **ENDGERÄTE** there.\n- Go to the button **NEU** (bottom right) and click it.\n\n![bintec-elmeg® management console, TELEFONIE page](uploads/2932b8009b5b9e0c3c3d773288d80d50/bintec-elmeg_be.IP_plus_07.png)\n\n- Set the option **Schnittstellentyp** to the value **VoIP**.\n- If necessary, select a **Standort** and enter a **Beschreibung**.\n- In the section **Interne Rufnummer**, select the phone number created earlier.\n- Click the **OK** button at the bottom right to save the configuration.\n\n![bintec-elmeg® management console, basic settings for terminals](uploads/c7d75d1d2375693d78eed2fec9f11697/bintec-elmeg_be.IP_plus_08.png)\n\n<!-- block: konfiguration-der-behnke-station -->\n### 1.2. Configuring the Behnke Station\n\n%[SIP_KONFIGURATION_BS_1](SIP_KONFIGURATION_BS_1)%\n\n   | Behnke Station field             | Value bintec-elmeg® be.IP plus |\n   | -------------------------------- | ------------------------------ |\n   | Phone number/user name           | Internal phone number          |\n   | User ID                          | Internal phone number          |\n   | Password                         | Password                       |\n   | Server                           | IP address of the be.IP plus   |\n  \n%[SIP_KONFIGURATION_BS_2](SIP_KONFIGURATION_BS_2)%\n\n<!-- block: faq -->\n## 2. FAQ\n\n%[NO_CONTENT](NO_CONTENT)%\n","lastModified":"2026-10-14T13:47:15+02:00"}