{"wiki":"en","slug":"ip-camera-as-system-camera","markdown":"<tags data-tags=\"Network;Camera;Configuration guides;\" />\n\n# IP camera as system camera for SIP video calls\n\nThis configuration guide explains how to set up an IP camera as a system camera for your Behnke-Station. \n\nBy integrating an IP camera as a system camera, your Behnke station can transmit the camera image to the remote party during calls.\n\n%[NOTE_REQUIRES_BASIC_SETUP](NOTE_REQUIRES_BASIC_SETUP)%\n\n<!-- block: anschlusshinweise-und-technische-anforderungen @0de88e59 -->\n## 1. Connection Notes and Technical Requirements\n\n- The camera must be reachable by the Behnke-Station within the network\n- Alternatively, the camera can be connected directly to the extension port or USB extension port of the Behnke station\n- A **maximum of one** camera can be integrated a system camera\n- The camera must provide an **MJPG stream via HTTP** that can be accessed by the Behnke-Station\n\n<!-- block: konfiguration-der-behnke-station @4235c74a -->\n## 2. Configuration of the Behnke-Station\n\n- Open your browser\n- Access the web interface of the Behnke-Station\n- Log in\n\n![Login screen of the Behnke-Station](uploads/2522590c61a8af136995342719c0d831/IP_Systemkamera_E_01.png)\n\n- Click on %[BS_MENU_NETWORK](BS_MENU_NETWORK)%\n- Scroll down to the section **IP camera**\n\n![Behnke-Station, Network, IP camera](uploads/db6cecc3446bcd72ee3b291e54a4bc03/IP_Systemkamera_E_02.png)\n\n- Set the option **Integration** to the value **manual definition**\n- Set the option **Type** to the camera type you want to connect\n- Set the option **Username** and **Password** to the required values for the camera\n- Set the option **Integration as** to the value **system camera**\n- Set the option **Force integration** to the value **no** unless you already have an USB-camera\n- Press %[BS_MENU_STORE_RED](BS_MENU_STORE_RED)% to save the configuration\n\n![Behnke-Station, Network, IP camera settings](uploads/340fc480b20010845c8ecdcf91200ced/IP_Systemkamera_E_03.png)\n\n- The device will be restarted\n- Please wait until the device is reachable again\n- Log in\n- You should now see the menu item %[BS_MENU_CAMERA](BS_MENU_CAMERA)%\n- If the menu item is not visible, re-do the steps before\n- Click on %[BS_MENU_CAMERA](BS_MENU_CAMERA)%\n- There you can see the video and configure the camera and other settings\n\n![Behnke-Station, Camera](uploads/ff1e808180fe08af6a3fd1cc087d56fc/IP_Systemkamera_E_04.png)\n\n<!-- block: faq @028c782f -->\n## 3. FAQ\n\n_This section is still empty_\n\n%[PROBLEME_KAMERA](PROBLEME_KAMERA)%\n%[LEGAL_NOTES](LEGAL_NOTES)%\n\n_This configuration guide has been checked with version 5.26_","lastModified":"2026-10-14T13:47:46+02:00"}