{"wiki":"en","slug":"konfiguration-einer-behnke-sprechstelle-im-hybridmodus-mit-behnke-innenstelle-zwei-sip-servern-und-an-einer-analoger-telefonanlage","markdown":"# Configuring a Behnke intercom station in hybrid mode with a Behnke indoor station, two SIP servers and an analog telephone system \n\n\n<!-- block: einleitung -->\n## 1. Introduction\n\nThis setup guide describes how to configure a Behnke intercom station in hybrid mode so that it can dial different call destinations.\n\nThe intercom station is, at the same time:\n\n- registered with two SIP servers\n- operated in intercom mode\n- connected to an analog telephone system\n\nThis allows different end devices to be called via different communication paths.\nIt is assumed that:\n\nall devices have already been started\nthe basic initial setup has been completed\nvalid IP addresses have been assigned\nthe web interfaces are accessible\nboth SIP servers are operational\n\n<!-- block: aufbauuebersicht -->\n## 2. Setup overview\n\nFunctional description\n\nIn this scenario, the intercom station supports several call destinations:\n\n- Indoor station via intercom\n- IP phone via internal SIP server\n- Smartphone with Linphone app via cloud SIP server\n- Analog telephone via analog telephone system\n\nSystems used\n\nIntercom station\nOperating mode: Hybrid\nIntercom: Group 1\n\nRemote stations\n\n- Indoor station (intercom group 1)\n- IP phone (registered with the internal SIP server)\n- Smartphone with Linphone app (registered with the cloud SIP server)\n- Analog telephone (connected to the analog telephone system)\n","lastModified":"2026-10-14T13:47:15+02:00"}