{"wiki":"en","slug":"konfiguration-von-zwei-sprechstellen-die-zwei-innenstationen-anrufen-mit-gruppenubergreifender-tastenfunktion","markdown":"# Configuring Two Door Stations That Call Two Indoor Stations – with Cross-Group Button Function\n\n<!-- block: einleitung -->\n## 1. Introduction\n\n%[EINLETUNG_INNENSTELLE](EINLETUNG_INNENSTELLE)%\n\n\n<!-- block: aufbauuebersicht -->\n## 2. Setup overview\nFunctional description\n\n**Device A**\n\nButton 1 → calls indoor station A (group 1)\n\n**Device B**\n\nButton 1 → calls indoor station B (group 2)                                                                                                                       \n\nButton 2 → calls indoor station A (group 1, cross-group)\n\n\n\n![Schamatischer_Aufbau__B_zwei__farben](uploads/551fc035403953e504c794ff6d64aee9/Schamatischer_Aufbau__B_zwei__farben.jpg)\n\n<!-- block: konfiguration-sprechstelle-a -->\n## 3 Configuration of door station A\n\n3.1 Assign intercom operating mode and name \n\nOperating mode: IP intercom\n\nDevice name: enter the device name in the \"Name\" field\n(e.g. \"Entrance A\").\n\nThis name is shown on the indoor station when a call comes in.\n\n![Betreibsart_und_Name__markiert_Sprechstelle](uploads/aec7bbfec9cb5fed9a2d5965fc3fc5b6/Betreibsart_und_Name__markiert_Sprechstelle_NEU_1247x915.jpg)\n \n3.2 Set the group\n\nGroup: 1\n\n![Sprechstelle_Gruppe_1_](uploads/1057cb94c2eb0abf4417c1419ee47e0f/Sprechstelle_Gruppe_1_NEU_1247x915.jpg)\n\n3.3 Button assignment\n\nButton 1 → com:1\n\nExplanation:\n\ncom:1 calls ID 1 within the configured group (group 1).\nThis means door station A calls indoor station A.\n\n![Tasten_mit_com_1_](uploads/3f2ce8df5450123377bc16268d604659/Tasten_mit_com_1_NEU_1247x915.jpg)\n\n<!-- block: konfiguration-innenstelle-a -->\n## 4 Configuration of indoor station A\n\n4.1 Assign intercom operating mode and name\n\nOperating mode: IP intercom\n\nDevice name: e.g. \"Monitor Group 1\"\n\n![Innenstelle__Modus_und_Gerätename__A](uploads/545b6c05d68569f631306c9303a85ac0/Innenstelle__Modus_und_Gerätename__A_1247x915_NEU_1247x915.jpg)\n\n4.2 Assign group and ID\n\nGroup: 1\n\nID: 1\n\nThe call is only delivered correctly if group and ID match.\n\n![IP-Sprechanlage_Innensprechstelle__Gruppe_1_ID_1](uploads/2570a6db4941af4d4ae179a3910c5cea/IP-Sprechanlage_Innensprechstelle__Gruppe_1_ID_1_NEU_1247x915.jpg)\n\n<!-- block: konfiguration-sprechstelle-b -->\n## 5 Configuration of door station B\n\n5.1 Assign intercom operating mode and name \n\nOperating mode: IP intercom\n\nDevice name: enter the device name in the \"Name\" field\n(e.g. \"Entrance B\").\n\nThis name is shown on the called indoor station \n\n![Betreibsart_und_Name__markiert_Sprechstelle](uploads/c1dff20be7a840091b5f85d580c15b5c/Betreibsart_und_Name__markiert_Sprechstelle_NEU_1247x915.jpg)\n\n5.2 Set the group and define the device name\n\nGroup: 2\n\n![Sprechstelle_Gruppe_2](uploads/877c7d27f899198891cfe83f80a23499/Sprechstelle_Gruppe_2_NEU_1247x915.jpg)\n\n \n5.3 Button assignment\n\nButton 1 → com:1\n→ calls indoor station B (group 2, ID 1)\n\nButton 2 → com:101\n→ calls indoor station A (group 1, ID 1)\n\n![Tasten__Gruppe_A_und_Gruppe_B_NEU_1247x915](uploads/013eda2bafca3c1b2de8da64ea3433d3/Tasten__Gruppe_A_und_Gruppe_B_NEU_1247x915.jpg){width=818 height=600}\n\n\nExplanation of cross-group dialing\n\nThe destination address is composed as follows:\ncom:group-ID\n\nThe following applies:\nFirst digit = target group\nNext two digits = ID\nExample:\n- com:101\n- \"1\" = group 1\n- \"01\" = ID 1\n\nThis makes it possible to dial a specific indoor station in group 1 from group 2.\n\n\n<!-- block: konfiguration-innenstelle-b -->\n## 6 Configuration of indoor station B\n\n6.1 Assign intercom operating mode and name \n\nOperating mode: IP intercom\n\nDevice name, e.g. \"Monitor Group 2\"\n \n![Innenstelle_Betreibart_und_Name_B](uploads/256760bf1bb92eead59574ed6baac20f/Innenstelle_Betreibart_und_Name_B_NEU_1247x915.jpg)\n\n6.2 Assign group and ID\n\nGroup: 2\n\nID: 1\n\n![Innenstelle_Gruppe_2_ID_1](uploads/8ddc699357ab1b2f1920827e51ed287f/Innenstelle_Gruppe_2_ID_1_NEU_1247x915.jpg)\n\n<!-- block: funktionspruefung -->\n## 7. Function test\n\nAfter completing the configuration, perform the following test:\n\n- Press button 1 on door station A\n→ Only indoor station A rings\n- Press button 1 on door station B\n→ Only indoor station B rings\n- Press button 2 on door station B\n→ Indoor station A rings\n\nIf the call is not delivered correctly, check the following points:\n\nGroup assignment\nID setting\nCorrect entry of the destination address (e.g. com:1 or com:101)\nNetwork connection\n\nTechnical note\n\nCross-group dialing via com:101 enables flexible call concepts, for example:\n\n- The rear entrance additionally calls the main monitor\n- The gate calls the house and the office\n- Gatekeeper function\n- This structure is particularly useful for larger systems.\n","lastModified":"2026-10-14T13:47:15+02:00"}