{"wiki":"en","slug":"konfiguration-von-zwei-sprechstellen-mit-sip-anbindung-in-hybrid-betriebsart-und-zwei-innenstationen","markdown":"# Configuring two intercom stations with SIP connection in hybrid mode and two indoor stations\n\n<!-- block: einleitung -->\n## 1. Introduction\n\nThis setup guide describes how to set up two Behnke intercom stations, where:\n\nIntercom station A only places internal group calls,\nIntercom station B is operated in \"Hybrid\" mode and additionally calls an IP phone via a SIP server.\n\nThe setup includes:\n\n- two Behnke intercom stations\n- two indoor stations in different groups\n- one IP phone (handset) registered with a SIP server\n\n<!-- block: es-wird-davon-ausgegangen-dass -->\n## It is assumed that:\n\n- all devices have already been started,\n- the basic initial commissioning has been completed,\n- valid IP addresses have been assigned,\n- the web interfaces are reachable,\n- the SIP server is operational and the IP phone is registered.\n\nThis guide describes the operating mode, naming, group configuration, SIP registration and button programming.\n\n<!-- block: aufbauuebersicht -->\n## 2. Setup overview\n\nFunctional description\n\nIntercom station A (one button)\n\n- Button 1 → calls indoor station A (group 1, ID 1)\n\nIntercom station B (three buttons, hybrid)\n\n- Button 1 → calls IP phone (SIP server)\n- Button 2 → calls indoor station B (group 2, ID 1)\n- Button 3 → calls indoor station A (group 1, ID 1)\n\n![Schematiche_sAufbau_3](uploads/0d6fe777d6228f406a17bc40b94ef032/Schematiche_schltung_C_3.jpg)\n\n<!-- block: konfiguration-sprechstelle-a -->\n## 3. Configuring intercom station A\n\n3.1 \"General\" menu\n\n- The following settings are made in the \"General\" menu:\n  Operating mode: IP intercom\n  Device name: e.g. \"Entrance A\"\n\n![Betreibsart_und_Name](uploads/229f0c988edee2465ffcb9701a87d43b/Betreibsart_und_Name_1247x915.jpg)\n\nThe device name is displayed on the indoor station being called.\n\n3.2 \"Intercom\" menu\n\n- In the \"Intercom\" menu:\n\n  Group: 1\n\n![Sprechstelle_Gruppe](uploads/2984e4967645943b7fef7b4033b9ba2b/Sprechstelle_Gruppe_3_1247x915.jpg)\n\n\n\n3.3 Button assignment\n\nIn the \"Buttons\" menu:\n\n- Button 1 → com:1\n\n![Tasten_mit_com_1](uploads/193e63761c9116460fb14be981098319/Tasten_mit_com_1_1247x915.jpg)\n\n\ncom:1 calls ID 1 within group 1.\n\n<!-- block: konfiguration-innenstelle-a -->\n## 4. Configuring indoor station A\n\n4.1 \"General\" menu\n\n- Operating mode: IP intercom\n- Device name: e.g. \"Monitor Group 1\"\n\n![Sprechstelle_Gruppe](uploads/68d432e1d09d6c88eceed2b495f2694d/Sprechstelle_Gruppe_3.jpg)\n\n4.2 \"Intercom\" menu\n\n- Group: 1\n- ID: 1\n\n![IP-Sprechanlage_Innensprechstelle__Gruppe_1_ID_1](uploads/c5c03499cb8f268d5aea5a4288da85f7/IP-Sprechanlage_Innensprechstelle__Gruppe_1_ID_1.jpg)\n\n<!-- block: konfiguration-sprechstelle-b-hybrid -->\n## 5. Configuring intercom station B (hybrid)\n\n5.1 \"General\" menu\n\n- Operating mode: Hybrid\n- Device name: e.g. \"Entrance B Hybrid\"\n\n![Sprechstelle_Name_Betreibsart_Hybridmodus](uploads/d3759e3cd67cc189dc3fec8cc3d399f2/Sprechstelle_Name_Betreibsart_Hybridmodus_1247x915.jpg)\n\n\n\n\n\n\n\n\n\n\nThe hybrid operating mode enables a combination of internal group calls and external SIP calls.\n\n5.2 \"Intercom\" menu\n\n- Group: 2\n\n5.3 \"SIP\" menu\n\nTo make SIP calls possible, the intercom station must be registered with the SIP server.\nEnter:\n\n- Enable SIP account 1 registration\n- Phone number / user name\n- User name (e.g. sipkonto1)\n- Password\n- SIP server address\n\n![SIP_Konto 1 Sprechstelle](uploads/02008132401dc26fda8b5870c6661ecd/SIP_Konto1_angepasst_1247x915.jpg)\n\nThe status must then show \"registered\".\n\nHelp on SIP accounts\n\n- [Registering with two different SIP accounts at the same time](different-SIP-accounts)\n\n5.4 Button assignment\n\nIn the \"Buttons\" menu:\n\n- Button 1 → sip1:phone number\n→ calls the IP phone via SIP account 1\n  Example: sip1:200\n\n- Button 2 → com:1\n→ calls indoor station B (group 2, ID 1)\n\n- Button 3 → com:101\n→ calls indoor station A (group 1, ID 1)\n\n![Taste_1_bis_3__Sip_innenstelle_Gruppenübergreifend](uploads/91bfd0dd9a79030ab334f99d0aee353c/Taste_1_bis_3__Sip_innenstelle_Gruppenübergreifend.jpg)\n\n<!-- block: konfiguration-innenstelle-b -->\n## 6. Configuring indoor station B\n\n6.1 \"General\" menu\n\n- Operating mode: IP intercom\n- Device name: e.g. \"Monitor Group 2\"\n\n\n![name_Innestelle_B](uploads/686f88054aa116c5fd21fb5f8c11a42f/name_Innestelle_B.jpg)\n\n6.2 \"Intercom\" menu\n\n- Group: 2\n- ID: 1\n\n![IP-Sprechanlage_Innensprechstelle__Gruppe_ID_1247x915](uploads/520d525b5786899c9a0ecfb5eb822e97/IP-Sprechanlage_Innensprechstelle__Gruppe_ID_1247x915.jpg)\n\n<!-- block: funktionspruefung -->\n## 7. Function test\n\n- Press button 1 on intercom station A\n→ Indoor station A rings\n- Press button 1 on intercom station B\n→ The IP phone rings\n- Press button 2 on intercom station B\n→ Indoor station B rings\n- Press button 3 on intercom station B\n→ Indoor station A rings\n\n\n\n<!-- block: technischer-hinweis -->\n## Technical note\nThis scenario combines:\n\n- internal group calls (com:)\n- cross-group calls (com:101)\n- external SIP calls (sip1:)\n\nThe \"Hybrid\" operating mode is required if an intercom station is to place both internal IP intercom calls and SIP calls.\n","lastModified":"2026-10-14T13:47:15+02:00"}