Ask the wiki AIAI

Help for Cybergate/ CyberTwice with a Microsoft® Teams® Cloud System

1. Setup guide

This setup guide describes how to commission a Behnke Station as a SIP extension on a Cybergate/ CyberTwice cloud system with Microsoft® Teams®. In the following, it is assumed that the basic configuration of the Cybergate/ CyberTwice cloud system has already been completed, and we limit ourselves exclusively to the steps required to commission the Behnke Station.

It is assumed that the Behnke-Station is already set up to the extent that access to the web interface is possible. If this is not the case, please follow the instructions provided with your base electronics (manuals) and refer to the technical manualRecently updated — within the last 72 hoursUpdated to complete the basic setup.

1.1. Configuration of the Behnke Station

• Open your browser
• Access the Behnke Station web interface
• Log in

• Click the menu item in the sidebar.
• Navigate to the SIP Account 1 or SIP Account 2 section.
• Set the Register option to yes

• Use the assignments from the following table and enter the information in the corresponding input fields (in the SIP Account 1 section, if applicable SIP Account 2) of your Behnke station.
• Open your browser
• Go to the web interface of the Behnke Station
• Log in

• Scroll to the section Encryption

• Set the option Media encryption to the value SRTP

• Set the option Enforce media encryption to the value yes

• Set the option Verify server certificates to the value no

• Scroll to the section Voice codecs

• Apply the values and order from the following table in the configuration of your Behnke Station:

  Behnke Station voice codecs	Value for Cybergate/ CyberTwice
  #1	G.72
  #2	G.711 µ-law (PCMU)
  #3	G.711 A-law (PCMA)

• Scroll to the section SIP video

• Set the option Video transmission to the value yes

• Set the option Preferred video resolution to the value 720p = 1280x720

• Set the option Maximum frame rate to the value 10 bps

• Set the option Keyframe rate to the value high

• Click Save in the sidebar to save the configuration
• Wait a moment until the Behnke Station is reachable again
• If the registration is successful, the Registration state option changes to the value registered
• If this is not the case, please check the previous steps again

• Click the menu item Buttons in the sidebar to save the configuration
• Navigate to the section of the button to be configured, e.g. Button 1
• Set the Action option to the value Call
• In the input field of the Phone number option, enter the number that should be called when the button is pressed
• Click Save in the sidebar to save the configuration

The configuration of the Behnke Station was last updated for version 5.26.

2. FAQ