Error messages
Click on each error message for a more detailed description and possible solutions.
Failure 1: Error reading image data, connection aborted
- An antivirus software or a firewall is delaying the stream through analysis
- The camera has ended the stream (depending on the model, this can happen after a long period of viewing)
Failure 2: Error reading image data, connection aborted
- An antivirus software or a firewall is delaying the stream through analysis
- The camera has ended the stream (depending on the model, this can happen after a long period of viewing)
Failure 3: Error reading image data, connection aborted
- An antivirus software or a firewall is delaying the stream through analysis
- The camera has ended the stream (depending on the model, this can happen after a long period of viewing)
Failure 4: Error reading image data, the TCP connection to the camera was terminated
- An antivirus software or a firewall is delaying the stream through analysis
- The camera has ended the stream (depending on the model, this can happen after a long period of viewing)
Failure 5: Error reading image data, the TCP connection to the camera was terminated
- An antivirus software or a firewall is delaying the stream through analysis
- The camera has ended the stream (depending on the model, this can happen after a long period of viewing)
Failure 7: An exception at TCP level occurred while connecting to the camera
- An antivirus software or a firewall is delaying the stream through analysis
- The configured IP address is not an IP camera
Failure 9: When connecting to the camera, the connection was cancelled while reading the HTTP header
- An antivirus software or a firewall is delaying the stream through analysis
- The configured IP address is not an IP camera
Failure 10: Incorrect HTTP header, no MJPEG stream is defined
- The configured IP address is not an IP camera
- An incorrect camera type was selected when configuring the camera
Failure 11: Wrong password
- An incorrect password was entered when configuring the camera
- The camera does not support "basic" HTTP authentication method, or it has been disabled on the web interface.
Failure 12: The camera is sending unknown response while establishing HTTP connection (Expected: 200 OK, or 401 Unauthorized)
- The configured IP address is not an IP camera
- An incorrect camera type was selected when configuring the camera
Failure 22: Error establishing the TCP connection to the camera
- An antivirus software or a firewall is delaying the stream through analysis
- Stream is delayed by analysis of firewall/deep packet inspection in the network (e.g. integrated in the switch, firewall appliance). This is not caused by a software on the PC itself.
- The camera has ended the stream (depending on the model, this can happen after a long period of viewing)