Activating the Configuration by a User
This setup guide describes how to activate the configuration for a user.
In addition to the administrator access, a user access and a sub-administrator access can also be set up for the Behnke Station.
The user access has a fixed, predefined scope of possible configuration rights. The administrator can specify which of the provided user settings are enabled. These include, for example, the configuration of passwords, special periods and dates, direct call buttons, door opener codes, audio settings, or individual voice announcements. Settings beyond this predefined range of functions are not available to the user.
The sub-administrator access, by contrast, is based on the administrator functions that are generally available. For the sub-administrator, you can specify precisely which areas and functions of the configuration are allowed or blocked. This makes it possible to set up an access with far-reaching administrative permissions without granting full access to all settings of the Behnke Station. A setup guide for the sub-administrator can be found here: Activating the Configuration by a Sub-AdministratorThis page was last checked against version 6.56; the current version is 6.33. This notice is generated automatically and was not written by an editor.
The administrator access has unrestricted access to the configuration of the Behnke Station.
It is assumed that the Behnke-Station is already set up to the extent that access to the web interface is possible. If this is not the case, please follow the instructions provided with your base electronics (manualsThis page carries no version. This notice is generated automatically and was not written by an editor.) and refer to the technical manualRecently updated — within the last 72 hoursThis page carries no version. This notice is generated automatically and was not written by an editor. to complete the basic setup.
1. Configuring the User Password
- Open your browser
- Go to the web interface of the Behnke Station
- Log in
- In the sidebar on the left, click the menu item
- Navigate to the section Web interface
- There you will find the option User password
1.1 Permitted Characters
The following characters may be used for the user password:
a-z A-Z 0-9 ! ? # $ % & ( ) * + , - . / : ; = [] | { } ^ _
Tip
Choose a password that is as long as possible. The Behnke Station evaluates the entered password and, if the password is too simple, indicates this below the input field with the message The current password is very insecure.
1.2 Saving the User Password
- Enter the new password in the option User password
- Click to save the configuration
2. Configuring the User's Permissions
- Open your browser
- Go to the web interface of the Behnke Station
- Log in
- In the sidebar on the left, click the menu item
- Navigate to the section Configuration by the user
- Set the option Allow to the value all user settings or only selected user settings
2.1 Value: "All user settings"
- For the user access, you can specify which of the following predefined configuration options are available. By default, these permissions are enabled with this option.
- All information about the permissions can be found under 2.2
2.2 Value: "Only selected user settings"
- For the user access, you can specify which of the following predefined configuration options are available. By default, these permissions are disabled with this option.
Password
- Allows the user to change their own user password.
Special periods and dates
- Allows the definition of special periods and dates, for example company holidays, during which the regular schedules are not applied.
Direct call buttons
- Allows the configuration of the direct call buttons, for example name, phone number, and other related settings.
Codes for door opener relays
- Allows creating, changing, and deleting codes for the door opener relays.
Phone numbers for call-controlled opening
- Allows creating, changing, and deleting phone numbers by which call-controlled door opening can be triggered.
Audio settings
- Allows adjusting the volume and the microphone sensitivity.
Individual voice announcements
-
Allows the management of individual voice announcements.
-
Click to save the configuration
3. FAQ
Note
I have forgotten the user password
If you, as a user, have forgotten your user password, please contact the administrator of your Behnke Station. The administrator can change the user password.
Note
The user cannot log in
- Go through this guide step by step
- Set the user password
- Save the configuration