Configuring and Using SNMP
The Behnke Station supports the Simple Network Management Protocol (SNMP), which allows the device to be monitored and managed centrally over the network.
It is assumed that the Behnke-Station is already set up to the extent that access to the web interface is possible. If this is not the case, please follow the instructions provided with your base electronics (manuals) and refer to the technical manualRecently updated — within the last 72 hours to complete the basic setup.
1. Setup Guide
- Open your browser
- Go to the web interface of the Behnke Station
- Log in
1.1 Enabling on the Behnke Station
- Scroll to the SNMP section
- Set the value of the Enable SNMP option to yes
- Set the value of the Permitted access option to the desired value (Read / Read and write)
- Set the value of the Authentication algorithm option to the value required by your system (e.g. SHA-512)
- Create a secure password and set the value of the Authentication password option accordingly
- Set the value of the Encryption algorithm option to the value required by your system (e.g. AES256)
- Create a secure password and set the value of the Encryption password option accordingly
- Download the Management Information Base (MIB) and import it into your system
1.2 Examples of Use with CLI Tools
This image shows some examples that were created on Linux (Ubuntu 24.04) using the tools snmpget and snmpset.
2. FAQ
Note
There is currently no content available here yet. As soon as content is planned, the pages will be marked as planned. Feel free to use the Report a problem function on the right in the toolbar to request new content, ask questions, or report anything that is unclear.
You can also give feedback after every heading, so that we can continuously improve our wiki:
- Move your mouse over the heading
- A small ? appears
- Click the small ?
We welcome every suggestion, every correction and every idea for improvement.