Configuration guide nfon®
1. Configuration guide
This configuration guide describes how to set up a Behnke Station as a SIP extension of an nfon® cloud PBX. We are assuming that the basic configuration of the nfon® cloud PBX has already been done, and we will only describe the steps required to register the Behnke Station with nfon®. We also assume that the Behnke station has already been integrated into the network and can be accessed via the IP address in a browser.
1.1. Configuring the extension for the Behnke Station
For each Behnke Station you'll have to add an "Unprovisioned SIP Device". Since you can only create provisioned devices on the system yourself, please contact nfon® support first. They can set up the desired number of unprovisioned end devices for you. You will then receive the corresponding SIP registration information for these devices by e-mail.
For further information on how to set up the extensions in your nfon® administration please contact your nfon® support.
1.2. Configuring the Behnke Station
-
Open a new tab in your browser, enter the IP address of the Behnke Station in the address bar and log in.
-
Click on "SIP Phone" in the menu. Scroll down to "SIP account 1" and select the option "yes" for "Register".
-
Then fill in the fields with your nfon® SIP credentials as follows and click "Save" on the left.
Field Behnke Station Value nfon® Phone number/user name SIP login User ID SIP login Password password Server Registrar ( <Contract ID>.reg.cloud-cfg.com, e.g. "AB1CD.reg.cloud-cfg.com")If the registration was successful, the "Registration state" changes to registered.
-
Then click "Buttons" in the menu on the left. For the desired call button enter the extension number or phone number that is to be called when the button is pressed. Then click "Save" on the left.
