Help for Webex by Cisco® and T-Systems® Cloud PBX
1. Setup guide
This setup guide describes how to put a Behnke Station into operation as a SIP subscriber on a Webex by Cisco® in conjunction with T-Systems® Cloud PBX. In the following, it is assumed that the basic configuration of the Webex by Cisco® and T-Systems® Cloud PBX has already been completed, and we limit ourselves exclusively to the steps required to put the Behnke Station into operation.
It is assumed that the Behnke-Station is already set up to the extent that access to the web interface is possible. If this is not the case, please follow the instructions provided with your base electronics (manuals) and refer to the technical manualRecently updated — within the last 72 hours to complete the basic setup.
1.1. Configuring the Behnke Station
- Open your browser
- Access the Behnke Station web interface
- Log in
- Click the
- Navigate to the SIP Account 1 or SIP Account 2 section.
- Set the Register option to yes
- Use the assignments from the following table and enter the information in the corresponding input fields (in the SIP Account 1 section, if applicable SIP Account 2) of your Behnke station.
- Open your browser
- Go to the web interface of the Behnke Station
- Log in
| Behnke Station field | Webex by Cisco® and T-Systems® value |
|---|---|
| Phone number/user name | Webex by Cisco® line ID@cloud-calling.t-systems-service.com |
| User ID | Webex by Cisco® SIP ID or authentication ID |
| Password | Webex by Cisco® password |
| Communication | Specify SIP domain and query server via DNS |
| Domain | fr06.hosted-eun.bcld.webex.com |
| Transmission protocol | TLS |
-
Scroll to the section Encryption
-
Set the option Media encryption to the value SRTP
-
Click in the sidebar to save the configuration
-
Wait a moment until the Behnke Station is reachable again
-
If the registration is successful, the Registration state option changes to the value registered
-
If this is not the case, please check the previous steps again
- Click the menu item in the sidebar to save the configuration
- Navigate to the section of the button to be configured, e.g. Button 1
- Set the Action option to the value Call
- In the input field of the Phone number option, enter the number that should be called when the button is pressed
- Click in the sidebar to save the configuration
The configuration of the Behnke Station was last updated for version 5.26.
2. FAQ
Note
There is currently no content available here yet. As soon as content is planned, the pages will be marked as planned. Feel free to use the Report a problem function on the right in the toolbar to request new content, ask questions, or report anything that is unclear.
You can also give feedback after every heading, so that we can continuously improve our wiki:
- Move your mouse over the heading
- A small ? appears
- Click the small ?
We welcome every suggestion, every correction and every idea for improvement.
dd