This setup guide describes the configuration of Behnke intercom stations and Behnke indoor stations in IP intercom mode. The setup shown is based on a network structure with a PoE switch, through which both the power supply and the network communication of the devices are provided.
Depending on the scenario, different group and ID assignments can be configured to implement the desired call logic between the intercom station and the indoor stations. It is assumed that:
- all devices are connected to a PoE switch and have already started up,
- the basic initial commissioning of the devices has been completed,
- valid IP addresses have been assigned,
- the web interfaces of the devices are reachable.
This guide describes only the respective group, ID and button configuration.